Keratherm product description
KERATHERM® Standard films white, green, pink, red, brown and the MT-films have a smooth surface in order to ensure that there is no entrapped air that would interfere with the heat transfer between the component and the heat sink. The material smooths out microscopic irregularities in the contact surfaces which improves the thermal interface and therefore increases the heat dissipation.The MT-films are new developed thermoplastic elastomere films with very good insulating behaviour and excellent mechanical and thermal characteristics.
KERATHERM® Silicone-free standard films are used wherever the use of silicone can lead to problems. Besides good thermal and outstanding electrical properties, these films are characterized by their good cut-through resistance.
KERATHERM® Phase Change Elastomer films do not consist of wax material. Because of there outstanding phase changing characteristics these special elastomers are also suitable for the automatic production - easy automatic assembly.
KERATHERM® Phase Change Material comprises a combination of hot-melt waxes with or without support. These films smooth out even the smallest irregularities between the power module and heat sink and thereby improving the contact between the surfaces and increase heat transfer.
KERATHERM® Thermal Grease is characterized, in particular, by its good plasticity and very low thermal resistance. There is no drying out or leaking out of the silicone components.
KERATHERM® Softtherm® is the ideal material for smoothing out even large component irregularities. Thanks to their outstanding compressibility, they produce an optimum thermal contact at the same time being electrically insulating. The supplied thicknesses range from 0.5-5.0 mm. Other thicknesses or shapes are available on request.
KERATHERM® Copper is a heat conducting material with copper film on one side produced by a special process. Possible applications are for example, active EMC protection or as a system carrier for electronic switches. A tailored polymer paste system guarantees a wide range of applications.
KERATHERM® Spaceform® is a non curing, highly filled silicone compound with outstanding mechanical, electrical and thermal properties. Because of its excellent conformability, Spaceform® allows a customized solution without any restrictions to dimensions or shape.
KERATHERM® Ferrite products can be purchased as “KERAMOLD®” sealing compound or as the flexible “F 96” film. The solvent-free, two-component polyurethane “Keramold®” is used to encapsulate and embed electronic components. The F96 ferrite film comprises soft ferrite and, on account of its good magnetic properties, is especially suitable for electromagnetic shielding, flexible coils or other magnetic applications.
KERATHERM® Sealing compounds can be used for encapsulating whole applications and dispensing housing lids or heat sinks. Thanks to its ease-of-use, it allows even the most complicated geometries to be encapsulated.
KERATHERM® Adhesive coating: every film type requires its own special adhesive system. Besides flexible adhesives with low adhesive strength, Kerafol® offers adhesives with high adhesive strength or with various fillings for improved heat transfer.